film blowing
英 [fɪlm ˈbləʊɪŋ]
美 [fɪlm ˈbloʊɪŋ]
薄膜吹塑
双语例句
- It is reported that the film originally planned July 1, 2016 release, but DreamWorks hit blowing dreams giant and Warners Tarzan.
据报道，这部电影原定于2016年7月1日上映，但是和梦工厂的《吹梦巨人》和华纳的《泰山》撞期。 - The experimental results showed that the main flow Reynolds number had no effect on the effusion wall film heat transfer coefficient, while the blowing ratio and configurations were the main factors.
研究发现主流是充分发展湍流时，主流雷诺数对发散壁燃气侧换热系数基本无影响，而吹风比和几何结构是主要的影响因素。 - The effect of rheological parameters on film blowing of resins was discussed.
并讨论了影响树脂吹膜加工的流变学参数。 - Computer Simulation for Flow of Plastic Melts and Film Bolwing; plastic film blowing and bag making line
计算机模拟塑料熔体的流动及膜泡吹胀过程塑料吹膜制袋生产线 - Plastic Film Blowing Machine, Plastic Bag Making Machine, Plastic Bag Printing Machine.
吹塑机，制袋机，印刷机。 - Study on Structure and Property of Different PE Resins for Film Blowing
不同类型吹膜级聚乙烯树脂结构与性能研究 - The influences of the arrangements of film cooling holes, average blowing ratio and main flow Reynolds number on the film cooling effectiveness were studied.
实验研究了开孔方式、主流雷诺数及平均吹风比等因素对某种多孔纵向波纹表面沿程气膜冷却效率的影响规律。 - Plastic film blowing and bag making line
GB/T10004-1998耐蒸煮复合膜、袋塑料吹膜制袋生产线 - The flow fields and cooling effectiveness of the film cooling from a row of cylindrical angled holes with special sphenoid tabs are investigated numerically at different blowing ratios.
在倾斜圆柱形气膜孔中加装一种特制的楔形突片结构，可以改善气膜孔下游平均冷却效率，本文对此进行了数值研究。 - Solider, soldier, won't you marry me with your musket, fife and drum? Numerical investigation of film cooling effectiveness over rotating curved surfaces: blowing ratio and curvature effect
士兵士兵，你背着火枪，吹横笛敲大鼓，是要娶我吗？吹风比和曲率对旋转曲面气膜冷却效率影响 - Numerical investigation of film cooling effectiveness over rotating curved surfaces: blowing ratio and curvature effect
吹风比和曲率对旋转曲面气膜冷却效率影响 - Plastic film blowing and bag making line It should be a insert pocket with profile stitching, not patch pocket as sample.
应该是有着假车线的插袋，而不是样品上的贴袋。 - It can be turned into liquid packaging film by blowing, and used for package of milk, bean milk, soy, vinegar and the liquids with low breaking per-centage in practice.
经吹塑制成液体包装膜后，可用于牛奶等液体的包装，具有破损率低、实际应用好等特点。 - The technology of film coextrusion blowing for polyethylene film of black alternating white and the application in crop growing were investigated.
研究了聚乙烯多功能配色地膜（黑色及黑白相间地膜）的挤出吹塑技术和在农业种植中的应用。 - The critical Technology of the Formation of the Auto sealing Holding plastics Hap Principle and Control for Blown Extrusion of Film with Filler and Groove Seal Strap Bubble Cooling Technology for Agricultural Film Blowing
农用塑料薄膜吹塑过程膜泡的冷却技术 - Study and Market Prospect on Civil Engineering Film Blowing Group
土工膜吹塑机组研制状况和市场前景 - Unsteady wake affects film cooling effectiveness by two ways. One is to disturb the film cooling layer, the other is to change the local blowing ratio.
发现非定常尾迹通过两方面来影响气膜冷却效率，一方面是通过对气膜层的扰动来降低气膜冷却效率，另一方面是通过改变局部吹风比来影响气膜冷却效率。 - Effect on Application of Inner Cooling Device of Film Bubble Three-layer Coextrusion Film Blowing Unit for Wide-width Shed Film
三层共挤复合宽幅吹塑棚膜机组的膜泡内冷装置应用效果 - The results show that PVC film can be manufactured by blowing method, and it is satisfied with the salt prodution needs.
实践证明吹塑法生产盐用PVC薄膜技术可行，完全能满足盐业生产的需要。 - This paper reports the current studies on the film cooling characteristics of single-row holes on flat plate at different blowing ratios, and analyzes the distributions of adiabatic film cooling effectiveness and heat transfer coefficient downstream the film holes.
对不同吹风比条件下的典型单排孔冷却结构的平板气膜冷却特性进行了实验研究，对冷却孔下游的气膜冷却效率及换热系数分布规律进行了分析。 - The structure and properties of coextrusion nylon/ polyethylene composite film and its application for grain store were introduced. BLOWING FILM TECHNOLOGY OF MULTI-LAYER COEXTRUSION
介绍了PE和尼龙共挤出复合膜的结构性能以及在粮食储藏中的应用，并与传统材料PVC膜和PE膜进行对比 - In this thesis, the author simulated the process of blowing film systematically. This paper provides theoretical references for designing blowing film die and accessory equipment.
本论文对塑料吹膜过程做了系统的模拟。并为设计吹膜机头及辅助设备，提供了理论依据。 - Study on Kinematics, Dynamics and Heat Transfer in the Film Blowing Process
吹塑薄膜生产过程中的运动学、动力学及热交换的研究 - A mathematical model in the Film Blowing Process is established on the basis of the results Pearson's and Petrie's investigations.
作者在Pearson和Petrie等人研究基础上，建立了吹膜理论数学模型。 - A model of blow film head was built via a program of the computer to display the internal structure of this head. The flowing state of the plastics melt in the head was simulated. The application of computer controlling technology in the film blowing processing was introduced.
用计算机建立了吹塑薄膜机头仿真模型，以展示机头的内部结构，模拟了塑料熔料在机头内部的流动状态，并介绍了吹膜过程中微机控制技术应用的现状。 - The experimental investigation on slot film cooling effectiveness was conducted with different blowing rates of the sample gas& CO 2, by using Heat-Mass Transfer Analogy method.
对缝槽气膜冷却在不同吹风比情况下的气膜冷却效率采用CO2传热传质类比方法进行了试验研究。 - Three kinds of photosensitizers with LLDPE were mixed in the banbury mixer separately, then the LLDPE film blown by the plastic film blowing machine, and then the performance of specimen was tested.
将三种光敏剂分别与LLDPE进行共混密炼后吹膜，并对制备的薄膜试样进行性能检测。 - And then it was concluded by discussing the effects of using twisted blade on the flow features in the rotor passage and film cooling performance on the rotor under three blowing ratios.
最后以3D模型讨论了叶片的扭曲对转子通道内流场的改变，以及吹风比对扭曲转子上的气膜冷却效率影响。